When it comes to oil changes, one of the most important things you need is the right size oil filter wrench. Otherwise, you run the risk of stripping the filter or damaging the housing. So, what size oil filter wrench do you need?
The size of your oil filter wrench will depend on the model of your car. Most wrenches are either 13/16 or 3/4 inches in diameter. However, there are a few exceptions.
For example, some BMWs use a 76mm wrench and some Mercedes models use a 64mm wrench. Before you buy a wrench, make sure to check what size you need for your specific car model.
It’s easy to get the wrong size oil filter wrench. Here’s how to make sure you get the right one.
The first thing you need to do is find out the size of your oil filter.
The most common sizes are 3/4 inch, 13/16 inch, and 7/8 inch. Once you know the size, you can purchase an oil filter wrench that is the correct size for your filter.
If you’re not sure what size your filter is, take a look at the label on the side of the filter.
It should list the diameter (in inches). If it doesn’t, or if you can’t find the label, measure the outside diameter of the filter with a ruler or tape measure. Once you have this measurement, round up to the nearest 1/8th inch and that will be your filter size.
Now that you know what size oil filter wrench to get, head to your local auto parts store or shop online and make your purchase!
Credit: www.motivxtools.com
What Size Wrench Do You Need for Oil Filter?
It’s important to know the right size wrench to use when changing your oil filter. The most common sizes are 3/8″, 7/16″ and 1/2″. You’ll need to check your owner’s manual to see what size is recommended for your vehicle.
If you don’t have the owner’s manual, you can usually find the information online or by calling the dealership. Once you know the right size, be sure to get a good quality wrench that will fit snugly on the filter. This will make it easier to remove and avoid stripping the threads.
How Do I Choose an Oil Filter Wrench?
Assuming you would like tips on how to choose an oil filter wrench:
There are a few different types of oil filter wrenches, so it is important to know which one you need before making a purchase. The most common type of oil filter wrench is the strap wrench.
This type of wrench has a long strap made of metal or nylon that goes around the circumference of the filter. The other end of the strap attaches to a handle, which is used to twist the filter off. Strap wrenches are ideal for removing spin-on filters, but they can also be used on cartridge-style filters as well.
Another type of oil filter wrench is the cup-type wrench. This wrench looks like a small metal cup with teeth on the inside edge. The cup fits over the end of the filter and locks in place when twisted.
To remove the filter, simply twist the handle and the cup will grip the filter tightly, allowing you to unscrew it. Cup-type wrenches are typically used on cartridge-style filters only.
These wrenches look like a regular socket with a hexagonal or square opening in the center. They come in various sizes to fit different types and sizes of filters (the size will be listed in inches or millimeters). To use this type of wrench, simply attach it to a ratchet handle and turn counterclockwise until loosened.
Socket wrenches can be used on either spin-on or cartridge-style filters.
What is the Diameter of a Standard Oil Filter?
There are a few different types of oil filters, and the diameter can vary depending on the type. The most common type of oil filter is a spin-on oil filter, which has a threaded base that screws onto the engine. The diameter of this type of filter is usually about 3 inches.
Another type of oil filter is a cartridge oil filter, which is more commonly found on older vehicles. These filters have a housing that needs to be unscrewed and then the cartridge inside needs to be replaced. The diameter of these filters is usually about 2-3 inches.
Do You Need a Special Wrench for Oil Filter?
Most oil filters can be removed with a standard 14mm or 15mm wrench. In some cases, you may need a special filter wrench to remove the filter. If your vehicle has an oil filter that is difficult to reach or remove, you may need a special wrench to remove it.
Honda & Nissan Oil Filter Wrench Size Information
Conclusion
If you’re unsure about what size oil filter wrench you need, there are a few things you can do to figure it out. First, consult your car’s owner’s manual. The manual should list the size of the oil filter wrench that’s appropriate for your car.
If you don’t have the manual, or if it doesn’t list the size, you can measure the oil filter itself. Most oil filters are between 2 and 4 inches in diameter. Once you know the diameter of the filter, you can choose an oil filter wrench that’s slightly larger so that it fits snugly over the top of the filter.