One of the great things about jeeps is that they’re built for customization. Whether you’re looking to add some style or improve your off-roading capabilities, there are plenty of aftermarket parts and accessories to choose from. Rock lights are a popular choice for those looking to add some flair to their ride, but many people shy away from them because they think drilling holes in their jeep is required.
Luckily, that’s not the case! There are several ways to mount rock lights without drilling, and we’re going to show you how.
- Decide where you want to mount your rock lights
- Using a tape measure, mark the location of the holes you will need to drill
- Put on safety goggles and gloves
- Drill pilot holes into the marks on the vehicle body
- Run the wiring through the drilled holes and to your chosen power source (usually the battery)
- 6) Attach the lights to their mounts using nuts and bolts (or whatever fasteners came with your particular light kit)
- 7) Test your installation by turning on the power source and making sure all of the lights come on
Installing Rock Lights in Wheel Well
Rock lights are one of the coolest and most popular way to customize your off-road vehicle. They provide a unique look that can really make your ride stand out from the rest. But before you can enjoy the benefits of rock lights, you need to install them properly.
Here’s a step-by-step guide on how to install rock lights in wheel well:
1. Remove any existing wheel well covers or liners. This will give you access to the bolts that hold the wheel wells in place.
2. Unscrew the bolts and carefully remove the wheel wells. Be careful not to damage the paint job on your vehicle.
3. Place the rock lights in the desired location within the wheel well.
Make sure that they are securely mounted so that they don’t come loose while driving.
4. Drill holes for the wiring harnesses that will connect the rock lights to your vehicle’s electrical system. Be sure to use weatherproof connectors to keep moisture out of the connection points.
Wireless Rock Lights
Wireless rock lights are a great way to add some extra light to your off-road vehicle. They are easy to install and can be used to illuminate your path when you are driving in the dark. Rock lights can also be used for camping and other outdoor activities.
How to Wire Rock Lights to Battery
If you’re looking to add some extra light to your off-road vehicle, rock lights are a great option. But how do you wire them up? Here’s a quick guide on how to wire rock lights to battery.
First, you’ll need to gather your supplies. You’ll need the rock lights, of course, as well as some wiring and a 12-volt battery. Once you have everything, it’s time to get started.
To begin, connect one end of the wiring to the positive terminal of the battery. Then, run the wiring under the vehicle to where you want to mount the lights. At each light location, strip about ½ inch of insulation from the wire and twist it around one of the mounting bolts.
Finally, connect the other end of the wiring back to the negative terminal of the battery. That’s all there is to it!
Now you can enjoy increased visibility when driving off-road at night.
Ledmircy Rock Lights
When it comes to rock lights, there are few brands that can boast the same level of quality and durability as Ledmircy. These lights are designed to withstand the harshest conditions, and they provide superior illumination in even the most difficult environments. Whether you’re looking for a light to help you see while off-roading or simply want to add some extra light to your campsite, Ledmircy has the perfect solution for you.
Ledmircy’s rock lights are available in a variety of sizes and configurations, so you can find the perfect setup for your needs. And with a wide range of colors to choose from, you can create a unique look for your vehicle or camp site. If you’re looking for an affordable way to add some extra light to your life, Ledmircy’s rock lights are the way to go.
How to Wire Rock Lights to a Switch
Rock lights are a great way to add some extra light to your off-road vehicle. But if you want to be able to control them, you’ll need to wire them up to a switch. Here’s how:
First, you’ll need to gather your supplies. You’ll need the rock lights, of course, as well as some wire and a switch. You can get all of this at your local hardware store.
Next, you’ll need to connect the wires from the rock lights to the switch. This is relatively easy – just twist the two wires together and then screw on a wire connector (or use electrical tape). Once they’re connected, flip the switch to make sure everything is working properly.
Now it’s time to install the switch. This part will vary depending on your vehicle, but generally speaking, you’ll want to drill a hole in an easily accessible spot and then mount the switch using screws or bolts. Once it’s in place, flip the switch again and make sure the lights turn on/off as expected.
And that’s it! You now have a functional set of rock lights that you can control with ease. Enjoy hitting those trails!
Credit: www.drivingline.com
Can You Install Rock Lights Without Drilling?
Yes, you can install rock lights without drilling. There are a few different ways to do this. One way is to use adhesive pads or velcro strips to attach the lights to the underside of your vehicle.
Another way is to use zip ties or wire loom clamps to secure the lights in place. If you have access to a welder, you can also weld the lights directly onto the frame of your vehicle.
Can You Hook Rock Lights to Battery?
Yes, you can hook rock lights to a battery. Most rock lights come with alligator clips that make it easy to attach them to a battery. Some people also use zip ties or wire to secure the connection.
Once you have the rock lights hooked up to the battery, you can use a switch to control when they are on or off.
How are Rock Lights Mounted?
Most rock lights are mounted using brackets that are screwed or bolted into the underside of the Jeep. The light itself is then attached to the bracket using a nut and bolt. Some lights come with adhesive mounting pads that can be used instead of brackets, but these are not as secure and can eventually fall off.
It’s always best to use brackets for a more permanent installation.
Where Should I Mount My Rock Lights?
There are a few things to consider when deciding where to mount your rock lights. The first is what kind of look you are going for. If you want a more subtle look, then mounting the lights under the bumper or fender flares is a good option.
If you want a more aggressive look, then mounting the lights on top of the bumper or grille is a better option.
The second thing to consider is how much light you need. If you only need a little bit of light, then mounting the lights in the front of the vehicle is a good option.
If you need a lot of light, then mounting the lights in the back of the vehicle is a better option.
The third thing to consider is how easy it is to install the lights. If you are not comfortable with drilling into your vehicle, then mounting the lights under the bumper or fender flares is probably not a good option for you.
On the other hand, if you are comfortable with drilling and have all of the necessary tools, then mountingthelights on topof thebumperorgrilleisnotaproblem.
Ultimately, it comes down to personal preference as to where you mount your rock lights. Just make sure that you take into consideration all three factors before making your decision so that you can get exactly whatyouwant!
How to install Rokk Customs Rock Lights With No Drilling/Screwing!
Conclusion
If you’re looking to add some rock lights to your off-road vehicle but don’t want to drill any holes, there are a few ways you can do it. You can use adhesive mounts that will stick to the body of your car, or you can use zip ties to secure the lights in place. Both methods are relatively simple and will give you the same end result – bright, visible rock lights that will help you see in even the darkest conditions.