One of the most popular off-roading modifications that you can do to your Jeep or truck is to install rock lights. Rock lights are bright LED lights that are mounted underneath your vehicle, typically on the frame or body. They provide extra light when you are driving off-road, and they look really cool too!
The best part about rock lights is that they are relatively easy to install, and you don’t have to drill any holes in your vehicle to do it.
- Decide where you would like to mount your rock lights
- Using a tape measure, mark the location of the holes for the brackets
- Drill pilot holes at the marked locations
- Affix the brackets to the vehicle using bolts or screws
- Place the rock lights in the brackets and secure them with nuts or lock washers
- Connect the wires from each light to a power source, such as a fused wire off of your vehicles’s battery terminals
Installing Rock Lights in Wheel Well
Installing rock lights in your wheel well is a great way to add some extra light to your off-road vehicle. Rock lights can help you see obstacles in the dark and make it easier to navigate rough terrain. Here are some tips for installing rock lights in your wheel well:
1. Choose a location for your rock lights. You’ll want to place them so that they shine on the ground in front of your tires. This will help you see obstacles and avoid them when driving off-road.
2. Drill holes for the mounting brackets. Use a drill bit that is slightly smaller than the screws or bolts you’ll be using to mount the bracket. This will ensure a tight fit and prevent the bracket from moving around.
3. Attach the mounting bracket with screws or bolts. Be sure to use hardware that is rated for outdoor use, as rock lights will be exposed to the elements while mounted in your wheel well.
4. Install the actual light fixture onto the bracket.
Wireless Rock Lights
Wireless rock lights are an excellent way to add light to your off-road vehicle without having to worry about running wires. These lights can be mounted anywhere on your vehicle, and they come in a variety of colors to choose from. You can use wireless rock lights to light up the trail ahead of you, or to add some extra flair to your rig.
There are a few things to keep in mind when shopping for wireless rock lights. First, you’ll want to make sure that the lights you purchase are compatible with your specific vehicle. Some lights are universal, while others are made specifically for certain makes and models.
Second, you’ll want to decide how many lights you need. This will depend on how much area you want to cover and how bright you want the light to be. Finally, consider what color(s) you’d like your wireless rock lights to be.
This is purely a matter of personal preference, but it’s something worth thinking about before making your purchase.
No matter what your needs are, there’s a set of wireless rock lights out there that’s perfect for you. So get out there and start exploring the great outdoors!
How to Wire Rock Lights to a Switch
If you’re looking to add some extra illumination to your off-road vehicle, rock lights are a great option. Not only do they look cool, but they can also be useful for seeing in dark or difficult terrain. And wiring them up to a switch is relatively simple.
Here’s how to do it:
First, you’ll need to gather your supplies. You’ll need the rock lights themselves, of course, as well as some wire and a switch.
You may also want some wire loom to tidy things up and make the installation more professional looking.
Next, decide where you want to mount the switch. It’s usually best to put it somewhere that’s easily accessible from the driver’s seat.
Then, run your wire from the switch location to each of the light locations. If you’re using wire loom, be sure to leave enough slack in the wire so that you can easily route it through the loom.
At each light location, splice into the power wire going to that light (usually by cutting it and adding a butt connector).
Then connect one end of your new wire to this power wire and run it back towards the switch location. When you get there, simply connect it to one side of the switch – doesn’t matter which – and repeat for each light until all wires are connected.
Finally, hook up the other side of the switchto power – again, this can be done by splicing into an existing power wire or running a new one from scratch.
That’s it!
Difference between Rock Lights And Underglow
When it comes to lighting up your ride, there are a few different options to choose from. Rock lights and underglow are two of the most popular choices, but what’s the difference between the two?
Rock lights are typically mounted on the underside of your vehicle, shining down onto the ground below.
This makes them great for off-road use, as they can help you see obstacles in your path. Underglow, on the other hand, is mounted on the body of your vehicle and shines outwards. This creates a nice effect when driving at night, and can also make your car easier to spot in crowded parking lots.
So which one should you choose? It really depends on what you’re looking for. If you want something that will help you see better while off-roading, rock lights are a great option.
If you’re just looking for something to make your car look cool, underglow is probably what you want.
How to Wire Rock Lights to Battery
If you’re looking to add some extra light to your off-road vehicle, rock lights are a great option. They can help you see better when driving at night or in low-light conditions, and they can also make your vehicle look pretty cool. But before you can enjoy the benefits of rock lights, you need to wire them up properly.
The first thing you’ll need to do is gather all of the necessary supplies. You’ll need the rock lights themselves, as well as a wiring harness and a switch. You may also want to use zip ties and wire loom to tidy up the installation.
Once you have everything gathered, it’s time to start installing the lights. The first step is to mount the lights in their desired location on your vehicle. It’s important to make sure that they’re mounted securely so that they don’t come loose while you’re driving.
Next, run the wiring from each light back to the switch location. If you’re using a wiring harness, this will be easy since it will have pre-made connections for each light. Otherwise, you’ll need to splice into the existing wires on your vehicle (be sure to consult your owner’s manual or an automotive wiring diagram before doing this).
Once all of the wires are connected, test them by turning on the switch and making sure that all of the lights turn on correctly. Finally, secure any loose wires with zip ties or wire loom and tuck them away so that they’re not hanging down where they could get snagged on something while you’re driving. That’s it!
With just a few simple steps, you’ve successfully wired up your new rock lights!
Rock Light Installation near Me
Are you looking for a rock light installation near you? There are many companies that offer this service, but how do you know which one is the best? Here are some things to look for when choosing a company to install your rock lights:
1. Experience – Make sure the company you choose has experience installing rock lights. This will ensure that they know what they’re doing and can get the job done right.
2. Quality – Choose a company that uses high-quality materials for their installations.
This will make sure your lights last longer and look great.
3. Price – Get quotes from several companies before making your final decision. This way, you can compare prices and find the best deal.
Credit: trail4runner.com
Can You Install Rock Lights Without Drilling?
Yes, you can install rock lights without drilling. There are a few ways to do this. One is to use double-sided tape to attach the lights to the underside of your car.
Another is to use velcro straps to secure the lights in place. You can also find special mounting brackets that allow you to screw the lights into place without having to drill holes. Whichever method you choose, make sure that the lights are securely attached so that they don’t come loose while you’re driving and cause damage or injury.
Can You Hook Rock Lights to Battery?
Yes, you can hook rock lights to a battery. There are a few things to keep in mind when doing this, however. First, make sure that the battery you use is powerful enough to handle the load of the lights.
Second, be sure to wire the lights properly so that they do not overload the circuit and cause a fire. Finally, make sure that the batteries are properly secured and will not come loose while driving.
How Do You Install Rock Well Wheel Lights?
Installing Rockwell wheel lights is a simple process that can be completed in just a few minutes. First, remove the old wheel lights from the wheels. Next, clean the area around the light mounting hole with alcohol to ensure a good bond.
Then, peel the adhesive backing off of the new Rockwell wheel light and press it into place. Finally, tighten the retaining nut to secure the light. That’s all there is to it!
Where Should I Mount My Rock Lights?
There are a few things to consider when deciding where to mount your rock lights. First, you’ll need to decide how many lights you want to use and where they will best fit on your vehicle. Second, you’ll need to take into account the type of terrain you’ll be driving on and how much light each location will need.
Finally, you’ll also want to consider how easy it will be to access the lights for maintenance or replacement.
The most popular place to mount rock lights is on the front bumper of the vehicle. This allows for good coverage of the area in front of the tires and makes it easy to see any obstacles in your path.
You can also mount them on the side steps or nerf bars if your vehicle has them. This helps provide light along the sides of the vehicle so you can see when turning or going over uneven terrain.
Another option is to mounts the lights underneath the vehicle.
This gives a more diffused light that can help illuminate rocks and other obstacles that might be difficult to see with just headlights. It’s important to make sure that any lights mounted under the vehicle are well protected from debris and water so they don’t get damaged while driving.
Finally, you can also install rock lights inside your wheel wells.
This helps give a bright, focused beam of light that can show any potential hazards in your path ahead. Be careful not drill too close to sensitive components like brake lines or suspension components when installing these types of lights.
No matter where you decide to mount your rock lights, making sure they are securely attached is key.
How to install Rokk Customs Rock Lights With No Drilling/Screwing!
Conclusion
We all know that rock lights are a great way to add some extra light to your off-road vehicle. But, what if you don’t want to drill holes in your vehicle to install them? Well, there is an alternative method that you can use to install your rock lights without drilling any holes.
First, you will need to find a suitable location for your rock lights. You will want to choose a spot that is out of the way of foot traffic and is not too close to any moving parts on your vehicle. Once you have found the perfect location, clean the area around it thoroughly with soap and water.
Next, take a piece of double-sided tape and attach it securely to the back of each light. Then, peel off the backing on the tape and stick the lights onto your chosen location. Make sure that they are pressed firmly against the surface so that they will stay in place.
Finally, plug in each light and turn them on. You should now have beautiful illumination under your car without having drilled any holes!