Coilovers are a type of suspension that allows for adjustable damping without having to disassemble the entire system. This makes them ideal for track days or autocross events where you want to be able to dial in the perfect amount of grip. The downside is that they can be a bit tricky to adjust, especially if you don’t have a spanner wrench.
In this article, we’ll show you how to adjust coilovers without a spanner wrench so that you can get the perfect setup for your car.
- Park your vehicle on a level surface and place jack stands under the frame to support it
- Remove the wheels using a lug wrench
- Locate the coilovers at the front or rear of the suspension, depending on where you’re adjusting them
- Use a spanner wrench to loosen the lock nut on top of the coilover sleeve
- Adjust the preload setting by turning the sleeve up or down until it’s at your desired setting
- Tighten the lock nut back onto the sleeve to secure it in place once you’ve found your perfect setting
Coilover Wrench Harbor Freight
If you’re looking for a quality coilover wrench, Harbor Freight is a great place to check out. They offer a wide selection of wrenches, including coilover wrenches, at very competitive prices. Their customer service is also top-notch, so you can be sure you’re getting the best possible deal on your purchase.
Coilover C Spanner
A coilover spanner is a specialized tool used to adjust the height of coilover suspension systems. It is also known as a spring compressor or shock wrench. This tool is necessary to properly adjust the ride height of your vehicle.
Many people believe that it is not possible to adjust the height of coilovers without this tool, but that is not true. You can use a simple socket set and ratchet to do the job just fine.
The main advantage of using a coilover spanner is that it makes adjusting the height very easy.
With a socket set, you would need to remove the top nut, then hold onto the bottom part of the strut while you turn the adjustment knob. This can be difficult and time consuming. With a coilover spanner, all you have to do is insert it into the topnut and turn.
It’s quick and easy!
If you are thinking about lowering your car or truck, then you will need a coilover spanner. This tool is an essential part of any suspension upgrade.
Universal Coilover Wrench
A coilover wrench is a specialized tool used to adjust the height of suspension coilovers. Coilovers are a type of suspension that uses coils instead of springs to support the vehicle. The coilover wrench is used to adjust the pre-load on the coil, which determines how stiff or soft the suspension will be.
There are many different brands and styles of coilover wrenches, but they all serve the same purpose. Most coilover wrenches have two arms that pivot in the middle. One arm has a ratchet head on it, while the other arm has a socket head.
The socket head is used to attach to the adjustment knob on the coilover, while the ratchet head is used to turn the knob. Coilover wrenches come in various sizes depending on the size of the adjustment knob on the coilover. It is important to choose a wrench that fits well in your hand and can comfortably reach all of the adjustment knobs on your suspension.
If you are looking for a quality coilover wrench, we recommend checking out our selection at Suspension Connection. We offer a variety of different sizes and styles to choose from, so you can find one that’s perfect for your needs.
Coilover Wrench Autozone
Coilover wrenches are a must-have for anyone who wants to install or adjust coilovers. They have a long, skinny handle that helps reach into tight spaces, and they’re also super strong so you can really crank on those bolts. Autozone has a great selection of coilover wrenches, and they’re always happy to help you find the right one for your needs.
Adjusting Coilovers Without Removing Wheels
If you’re looking to get a little bit more lowered look for your car, or just want to make some adjustments to how your coilovers are set up, you don’t necessarily have to remove your wheels to do so. This can save you a lot of time, and if you’re careful, it’s not that difficult to do.
To start, park your car on level ground and put it in neutral.
Next, jack up the car and support it with jack stands. Once the car is securely supported, locate the coilover adjustment knob. It should be located at the top of the coilover assembly.
Using a wrench or socket (depending on what kind of knob is present), turn the knob clockwise to raise the vehicle, or counterclockwise to lower it. Each full turn will result in approximately 1/4″ of adjustability. Once you’ve achieved the desired height, lower the car back down and remove the jack stands.
That’s all there is too it!
Coilover Spanner Wrench near Me
There are a few things to consider when purchasing a coilover spanner wrench. First, you will need to decide which size you need. The most common sizes are 10mm, 12mm, and 14mm.
Second, you will need to determine the length of the wrench. The most common lengths are 6 inches and 8 inches. Finally, you will need to decide on the material of the wrench.
The most common materials are steel and aluminum.
Be sure to compare prices before making your purchase.
How to Adjust Rear Coilovers
If you’re looking to adjust your rear coilovers, there are a few things you’ll need to keep in mind. First, you’ll need to make sure that your vehicle is properly supported. You can do this by either using jack stands or ramps.
Once your vehicle is supported, you’ll need to locate the adjustment knob on your coilover. It’s important to note that the adjustment knob will be different depending on the brand of coilover you have. With that being said, most brands will have an adjustable knob located near the top of the coilover.
Once you’ve located the adjustment knob, it’s time to start making adjustments. If you’re wanting to lower your vehicle, simply turn the knob clockwise. On the other hand, if you’re wanting to raise your vehicle, you’ll need to turn the knob counterclockwise.
It’s important to make small adjustments until you get the desired results. Making large adjustments at once can result in an uneven ride height which can cause problems down the road.
That’s all there is to it!
Adjusting rear coilovers is a relatively simple process as long as you take your time and make small adjustments until you get the desired results.
Adjustable Shock Spanner Wrench
An adjustable shock spanner wrench is a tool that is used to remove and install the nuts on the top of shocks. This wrench allows you to adjust the amount of torque that is applied to the nut, making it easier to remove or install the nut without damaging it.
This type of wrench is especially useful when working with suspension components, as they are often tight and require a lot of force to remove or install.
The ability to adjust the amount of torque applied makes this type of wrench essential for anyone who works on suspensions regularly.
Credit: raceland.com
Do You Need a Spanner Wrench to Adjust Coilovers?
No, you do not need a spanner wrench to adjust coilovers. Coilovers typically have an adjustment knob on the top of the shock that allows you to dial in the amount of preload on the spring. This can be done by hand without any tools.
Can You Adjust Coilovers by Hand?
If you’re looking to adjust the height of your coilovers, you can do so by hand. Simply turn the adjustment knob on the coilover to raise or lower the suspension. Keep in mind that you’ll need to readjust both the front and rear coilovers in order to maintain balance.
What Can Use Instead of C Spanner?
There are a few different types of tools that can be used instead of a C spanner. One type of tool is called an “open-end wrench.” This type of wrench has a open jaw that fits over the nut or bolt head.
Another type of tool that can be used is called a “socket wrench.” This type of wrench has a socket that attaches to the nut or bolt head. There are also some ratchet wrenches that can be used.
These wrenches have a handle and a ratcheting mechanism that allows them to loosen or tighten nuts and bolts.
What Tools Do I Need to Adjust Coilovers?
If you’re looking to adjust your coilovers, there are a few things you’ll need. First, you’ll need an adjustable wrench or crescent wrench. You’ll also need a measuring device like a ruler or tape measure, and something to mark the measurement with like chalk or a marker.
Finally, you’ll need either an impact gun or ratchet and socket set.
To adjust preload, which changes the height of your vehicle, you’ll first want to loosen the locknut on the bottom of the coilover. Next, use your wrench to turn the adjustment sleeve until you’ve reached your desired preload setting.
Once that’s done, tighten down the locknut to secure it in place.
To adjust rebound damping, which controls how quickly the suspension returns to its original position after being compressed, start by loosening the top locknut on the coilover. Then, use your wrench to turn the rebound adjustment knob clockwise to increase damping or counterclockwise to decrease it.
When you’re finished making adjustments, be sure to retighten both locknuts before hitting the road again.
How to Adjust coilovers without spanner tool
Conclusion
If you’re looking to lower your car, one of the best ways to do it is by installing coilovers. Coilovers allow you to adjust the height of your car, and they’re relatively easy to install. However, many people don’t know how to adjust coilovers without a spanner wrench.
Thankfully, it’s not too difficult.
To adjust coilovers without a spanner wrench, start by loosening the locking nut on the bottom of the coilover. Next, turn the adjusting sleeve until it’s at the desired height.
Once you’ve done that, simply retighten the locking nut and you’re good to go!